DIAMOND PAD

For a
powerful shine

Our diamond cleaning pads are suitable for routine and deep cleaning. Special VreactiV technology delivers an impressive cleaning performance and brings a fresh sparkle back to your floors. For monstrous efficiency in the professional cleaning and treatment of all kinds of flooring.

Image

Brief information

Our FloorZilla diamond cleaning pad is designed for powerful cleaning and treatment. This combination is the result of VreactiV technology and its use of cleaning granules that can move in any direction. Depending on where it is used, four different types are available: from gentle FloorZilla diamond green for cleaning and buffing, to powerful FloorZilla diamond black for the perfect finish.

Savings potential

Longer service life85%
Less water use50%
Less electricity17%
No detergents100%
Less CO2 emissions33%
Image

For resilient flooring

Image
far fa-dot-circle

Maintenance cleaning

Objective: cleaning and buffing for a lasting, maximum shine
Application: use FloorZilla diamond green with a scrubber dryer and minimise water consumption. The floor is also buffed, producing a long-lasting sheen.

Basic cleaning

Objective: ecological coating removal
Application: use FloorZilla diamond red with a single disc or orbital machine to remove the previous coating. Do away with deep cleaner entirely and minimise water consumption.
far fa-dot-circle
Image

For hard flooring

Image
far fa-dot-circle

Maintenance cleaning

Objective: cleaning and buffing for a lasting, maximum shine
Initial condition: in the case of minimal scratching and a gloss level of over 50 GU (gloss unit), we recommend immediate routine cleaning.
Application: use FloorZilla diamond green with a scrubber dryer and minimise water consumption.

1-step preparation

Objective: polishing for additional shine
Initial condition: in the case of minimal scratching and a gloss level of over 30 GU (gloss unit), we recommend the 1-step treatment for polishing the floor.
Application in routine cleaning: use FloorZilla diamond yellow with a scrubber dryer and clean the area approximately 10 times with minimum water intake.
Application in deep cleaning: use an orbital or single disc machine to polish the floor with FloorZilla diamond yellow and repeat the process approximately 2 to 4 times.
Following the 1-step treatment: continue the long-term use of FloorZilla diamond green with a scrubber dryer to buff and preserve the floor covering.
far fa-dot-circle
Image

2-step preparation

Objective: fine sanding and polishing for additional shine
Initial condition: in the case of significant scratching, a mottled surface appearance or grey film, we recommend performing the 2-step treatment. As a rough indication, the gloss level should be over 10 GU (gloss unit) in order to achieve the required sheen.
Application in routine cleaning: use FloorZilla diamond red with a scrubber dryer and clean the area approximately 2 to 3 times. Then use FloorZilla diamond yellow with a scrubber dryer and clean the area approximately 10 times.
Application in deep cleaning: use an orbital or single disc machine to finely sand the floor with FloorZilla diamond red during the initial step. After repeating this process approximately 1 to 2 times, switch to FloorZilla diamond yellow and polish until the desired sheen is achieved, repeating the process approximately 2 to 6 times.
Following the 2-step treatment: continue the long-term use of FloorZilla diamond green with a scrubber dryer to buff and preserve the floor covering.
far fa-dot-circle
far fa-dot-circle

1. Fine sanding

Image

2. Polishing

Image

3-step preparation

Objective: sanding, fine sanding and polishing for additional shine
Starting condition: it’s not too late! Our 3-step treatment is designed for extremely dull and worn floors. As a rough indication, the gloss level may be lower than 10 GU (gloss unit).
Application: use an orbital or single disc machine to sand the floor with FloorZilla diamond black. Repeat the process until a uniform surface appearance has been achieved. This usually needs to be repeated approximately 1 to 3 times.
After sanding: follow the instructions for the 2-step treatment.
far fa-dot-circle
far fa-dot-circle
far fa-dot-circle

1. Sanding

Image

2. Fine sanding

Image

3. Polishing

Image
Image

Download diamond product specification sheet

Here is an overview of the FloorZilla diamond product portfolio for you to download as a product specification sheet.

Different pads with varying applications

Four harmonised diamond pads. The right pad for all routine and deep cleaning: from gentle FloorZilla diamond green for cleaning and buffing to powerful FloorZilla diamond black for the perfect finish.

Image
Image
To establish an innovative and sustainable solution for the professional cleaning market: it is this vision that drives the development of FloorZilla cleaning pads. This takes place entirely within the German research landscape, at ecoCOAT GmbH from Munich.

Contact


ecoCOAT GmbH
Kesselbodenstraße 4a
85391 Allershausen - Germany
Tel.: +49 8166 6738 750
info@floorzilla.de

Product sheets